The Ford Barn - View Single Post

100IH · 07-15-2018, 01:34 PM

Sure, not much room. Do what works with what you have. Use a dab of grease on the grooves where the keepers go. Fiberous like for the rear wheel bearing. Then squish keepers in place.

07-15-2018, 01:34 PM	#9
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: Modern Valve Spring Retainers 30 CCPU Sure, not much room. Do what works with what you have. Use a dab of grease on the grooves where the keepers go. Fiberous like for the rear wheel bearing. Then squish keepers in place.