View Single Post
Old 07-25-2021, 02:26 PM   #7
Adam/Mill Valley CA
Senior Member
 
Adam/Mill Valley CA's Avatar
 
Join Date: May 2010
Location: Mill Valley,CA
Posts: 275
Default Re: 3-brush gen problems

Hotcoupe, FunProjects may make a diode type cutout but the unit I'm referring to is a full voltage reg (with a cutout integrated into the circuitry) contained within a stock appearing cutout case. I have read of a couple of other voltage reg possibilities over on the model A side, one within the generator which replaces the 3rd brush, and another attached to the band cover at the end of the generator, and there have been positive posts about those-perhaps the first of those is what you are referring to? For my part, the FunProjects unit worked and stood up well for many years so if I can get another I'll go that route, if not I'll explore these other options. Rotorwrench I looked at the Texas-T parts site but didn't see anything relating to a voltage reg.


Adam
__________________
1936 pickup, stock, black
1965 Mustang coupe 289/4bbl, black/red
1971 Alfa Romeo GTV 1750 coupe, dark red/tan
1970 911E 2.2 litre dark blue/black
1968 BMW R50/2 US, black (m'cycle)
1967 Triumph TR6R , sea foam/cream (m'cycle)
2022 Royal Enfield Interceptor 650 red (m'cycle)
1974 Honda CB750 red (m'cycle)
2000 Kawasaki W650 blue/silver (m'cycle)
Adam/Mill Valley CA is offline   Reply With Quote