Quote:
Originally Posted by Don T
Attached is a pic I took to keep me from getting mixed up on reassembly; I believe this was from a undisturbed carb. The three sided one is used on the brass seat, the four sided on the pump. The three sided tip is clean while the 4 sided has the "white stuff" which comes from where it lives, in the bottom of the carb where all the other "white stuff" lives.
|
Thanks. Ok. That means the two three sided ones must also be the original fuel inlet needle valve operated by the float. I must have gotten two new ones (the brass 4-sided ones with the soft tip). Part of the problem is my iPad deleted all the pics I took during disassembly.