The Ford Barn - View Single Post

296 V8 · 07-05-2010, 12:21 PM

On the second attempt (after the photo)
I removed the barbed fitting (at the center 90) and installed a nipple and coupler then a male threaded pcv valve (threads on the outgoing side)

Moved forward so its suckin blow by as far as possible from the breather / incoming air.

07-05-2010, 12:21 PM	#19
296 V8 BANNED Join Date: May 2010 Location: nor~cal Posts: 455	Re: breather with PCV tube or PCV valve? On the second attempt (after the photo) I removed the barbed fitting (at the center 90) and installed a nipple and coupler then a male threaded pcv valve (threads on the outgoing side) Moved forward so its suckin blow by as far as possible from the breather / incoming air.