Quote:
Originally Posted by daveymc29
If I understand the hub cap correctly, the tabs should all go into the center opening of the wheel, then the wheel should be reversed and you bend perhaps four tabs to fasten the cap the wheel. I have never worried about them making noise as I bent the four tabs tight enough to prevent any movement. Never have used the rubber band or O-ring your picture showed. Let us know how you r old ones were and what you do to the new ones.
|
The reason I bought new hub caps is that I would like them to match. I’m guessing the tabs on the old hub caps will break when I bend them to get them off.
Sent from my iPhone using Tapatalk