The Ford Barn - View Single Post - media blasting

wrndln · 08-31-2010, 03:42 PM

The size of the nozzle is also important. I use a small nozzle 3/32", however it enlarges to about 1/8" before I replace it. A large nozzle risks damaging the sheetmetal.

08-31-2010, 03:42 PM	#7
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,162	Re: media blasting - special considerations? The size of the nozzle is also important. I use a small nozzle 3/32", however it enlarges to about 1/8" before I replace it. A large nozzle risks damaging the sheetmetal.