Re: Steering / Tie Rod Conundrum
I guess I don't understand the geometry of the steering system, but I can't see any way this would make a difference. The total length of the rod changes the toe in/toe out, so it doesn't matter if one rod end is screwed in more or less than the other - unless one is bottoming out on the threads of the rod. Did you roll the car back and forth between adjustments or adjust with the wheels off the ground then check with it back on the ground? - repeat either way you adjust until it is correct on the ground. IMHO
John
Last edited by aermotor; 07-19-2020 at 08:03 AM.
|