The Ford Barn - View Single Post

37 Cab · 07-10-2020, 06:31 PM

I usually loosen the bleeder a little and put a piece of vacuum hose on the bleeder valve and run it into a container partially filled with brake fluid. Make sure the end of the hose is submerged and pump the brakes a few times holding it down with my hood prop rod from between the brake pedal and front of the seat. Close the valve and move on to the next wheel. Leave the wife in the house.

07-10-2020, 06:31 PM	#15
37 Cab Senior Member Join Date: Dec 2014 Location: Miami Oklahoma Posts: 535	Re: In these times, Fordbarn is my comfort I usually loosen the bleeder a little and put a piece of vacuum hose on the bleeder valve and run it into a container partially filled with brake fluid. Make sure the end of the hose is submerged and pump the brakes a few times holding it down with my hood prop rod from between the brake pedal and front of the seat. Close the valve and move on to the next wheel. Leave the wife in the house. __________________ Tommy