View Single Post
Old 04-29-2020, 09:27 PM   #8
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
Default Re: Flat head RPM range

On my '51, with a slightly modified Mercury engine (Rochester 2G, Edmunds heads, and a Mallory dual point), anything above 2700-2800 starts to get uncomfortable. For me, with the tire size/ rear end ratio I have, that allows me to cruise about 65-70. It will easily go higher than that, and will run over 4000 "going through the gears".

I do not like running it over 4000. It doesn't seem to do any good anyway.
tubman is offline   Reply With Quote