Thread: changing to 5.50 Bias Ply = changing to 3.54 ratio
View Single Post
Old 07-19-2019, 04:10 PM   #16
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: changing to 5.50 Bias Ply = changing to 3.54 ratio
Quote:
Originally Posted by 30 Closed Cab PU View Post
M2M

I am running 7 X 16 Tornel bias ply with a 3.54, circumference 30.8 inches.

I have checked speed at multiple side of the road radar displays and am dead on. Went with these because they give me the same results as standard OEM rims/tires.

Picture shows tires, spare is standard rim/tire.

If interested I will go for run and see what speed is 2000 rpm. Let me know if interested and I will post back.


Just went for a drive 2000 RPM = 49 mph
30 Closed Cab PU is offline   Reply With Quote