Quote:
Originally Posted by tubman
Lanny,
As a last resort, try the soak in Evaporust I suggested earlier. I think you can buy a quart at Advanced Auto or some such for less than $10. That should be more than enough to immerse the rusty part. Just another test procedure. (After soaking it in water, it'll probably need this.)
If it doesn't work, I'll pay for the Evaporust next time I see you.
Denny
|
==============================================
hey Denny, how ya doin...
I used this old very Rusty nut and bolt just for the experiment, to see
if the "50-50 mix" was worth a hoot to free up very rusty stuff. It Isn't.
Here is a picture of a very rusty little hinge that I had placed in the mix
back a couple years ago too. I pounded a screw driver into one end of it
this morning, and as you can see, the little hinge would NOT budge loose.
Click on pix to Enlarge