Thread: 30 Zenith Carb
View Single Post
Old 06-09-2016, 02:11 PM   #9
William Kelchner
Senior Member
 
William Kelchner's Avatar
 
Join Date: Feb 2012
Location: Warrenton, Va.
Posts: 459
Default Re: 30 Zenith Carb

Ok you guys thanks. I shall go through everything over the weekend, saving the carb for last, hopefully the culprit will be identified. I replaced the dist with an original type from Bratton's, the Zenith was also purchased from them, all this about 2 years ago. I also replaced the timing gear around that time.

I shall report back. Thanks again.
William Kelchner is offline   Reply With Quote