Re: LED Tail Lights - Adding Resistors
An update. I switched out the (thermal) flasher unit to a different brand I had on hand. The flash rate is now quite acceptable. Interestingly, the flash rate is identical on both left (includes resistor) and right (no resistor). I conclude that, somehow, the added resistor is not making proper contact on one lead or the other.
Thanks for all your suggestions......sometimes I guess it pays to try the simplest thing, even if it's illogical! Apparently it's too much to expect that 535 flashers are all the same!
One more test to try: I'll pull the incandescent bulb in the front flasher to see if its absence makes any difference.
|