Quote:
Originally Posted by deuce_roadster
Mac VP I get 3" exactly on the 91A --- 3 5/8" on the 19A . I hooked a tape on the flare at the base where the blades mount and measured to the mounting flange (not the part that indexes into the crank pulley) These are new, out of the FoMoCo box.
|
I measured the hub on my '41 Merc Town Sedan and it is also 3 5/8" as above. Puts the front edges of the six blade fan approx 7/8" from the radiator core.
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302