Quote:
Originally Posted by deuce_roadster
Mac VP I get 3" exactly on the 91A --- 3 5/8" on the 19A . I hooked a tape on the flare at the base where the blades mount and measured to the mounting flange (not the part that indexes into the crank pulley) These are new, out of the FoMoCo box.
|
Just remember one thing Mike, and Mac. Even though it is NOS in a FoMoCo box, "FoMoCo" is the 'key' here. On 11/20/1948, a U.S. federal trademark registration was filed for FoMoCo. This trademark is owned by Ford Motor Company,
One American Road
Dearborn, MI 48126. The USPTO has given the FoMoCo trademark serial number of 71569147.
So, even though it is NEW, and it is a legitimate Ford piece, it should be considered a "replacement part" manufactured no earlier than '49, and MAY not
necessarily replicate the original fan PRECISELY! DD