The Ford Barn - View Single Post

Russ/40 · 06-29-2019, 08:31 AM

I have performed tests on JB Weld and gasoline, and results prove it holds for quite a while, but eventually it breaks down. I like Tiger1000's solution, or, silver solder the holes closed and redrill for the rivets. I have had great results with silver solder. I like the way it flows better than brazing.

06-29-2019, 08:31 AM	#4
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Carburetor float hinge bracket dislodged I have performed tests on JB Weld and gasoline, and results prove it holds for quite a while, but eventually it breaks down. I like Tiger1000's solution, or, silver solder the holes closed and redrill for the rivets. I have had great results with silver solder. I like the way it flows better than brazing. Last edited by Russ/40; 06-29-2019 at 08:37 AM.