The Ford Barn - View Single Post

Jim Brierley · 12-10-2019, 12:34 PM

A rigid hone is best, they tend to straighten the bores. Clean cylinders and below them after honing, otherwise the grit will do serious damage to the engine. Change oil within 100 miles to insure all is clean.

12-10-2019, 12:34 PM	#8
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,085	Re: Replacing pistons A rigid hone is best, they tend to straighten the bores. Clean cylinders and below them after honing, otherwise the grit will do serious damage to the engine. Change oil within 100 miles to insure all is clean.