10-03-2013, 12:13 PM
|
#3
|
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,925
|
Re: Axle retainer
Hi Bob, My retainers are made to fit the MT PRODUCTS 1939 Lincoln Bendix brake conversion kit far and are superior to ANY currently on the market. They are made of 1/4 inch thick and 3/16 inch thick steel not thin gauge bent sheet metal. Here's the low down.
https://fordbarn.com/forum/showthread...drum+retainers
|
|
|