The Ford Barn - View Single Post

billybronco1 · 10-21-2020, 08:41 PM

The last few days I have been letting the car run at idle for about 45 minutes trying to seal a leaky head gasket with sealer. The car is not registered so I can't drive it. First two days the gauge sat at 3/4 once hot, today it was all the way to the top but it was not steaming. Hopefully it will run cooler when driving. BTW the leak is slowing down.

10-21-2020, 08:41 PM	#11
billybronco1 Senior Member Join Date: Dec 2012 Location: MA Posts: 570	Re: Which Oil Sending Unit Should I Use? The last few days I have been letting the car run at idle for about 45 minutes trying to seal a leaky head gasket with sealer. The car is not registered so I can't drive it. First two days the gauge sat at 3/4 once hot, today it was all the way to the top but it was not steaming. Hopefully it will run cooler when driving. BTW the leak is slowing down.