Re: Draglink has a slight kink in it.
It should be straight but as Wensum says, they often get a nudge from a tyre and end up with a bend. Just straighten it and drive on is my advice. Oh, and adjust the steering stops so the tyre doesn't hit the drag link. You might have to put a washer under the nut on the cotter pin that holds the king pin on the RHS.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Last edited by Synchro909; 09-18-2019 at 06:07 AM.
|