The Ford Barn - View Single Post - Follow-Up Model A Upholstery Mystery

woofa.express · 03-13-2020, 03:49 PM

the seat back in both my 28 ute and 28 tourer are sprung and about 5 inches thick. I replaced the ute back with medium density foam about 2 inches thick and moved the seat back, modifying the seat frame. Entry/exit is easier.
I will do the same with the tourer except the back is partially wrap around. I have removed the rear set of springs from the seat and again modified the frame which, like the ute provides more foot room for entering and exiting the vehicle.
The fact it is partially wrap around is presenting a little difficulty at the moment.

03-13-2020, 03:49 PM	#3
woofa.express Senior Member Join Date: Jan 2018 Location: Tocumwal, NSW, Australia Posts: 1,748	Re: Follow-Up Model A Upholstery Mystery the seat back in both my 28 ute and 28 tourer are sprung and about 5 inches thick. I replaced the ute back with medium density foam about 2 inches thick and moved the seat back, modifying the seat frame. Entry/exit is easier. I will do the same with the tourer except the back is partially wrap around. I have removed the rear set of springs from the seat and again modified the frame which, like the ute provides more foot room for entering and exiting the vehicle. The fact it is partially wrap around is presenting a little difficulty at the moment. __________________ I know many things, But I don't know everything, Sometimes I forget things. And there are times when I have a long memory.