The Ford Barn - View Single Post

sjhark · 11-18-2018, 03:20 PM

Since I seemed to have stumped everyone with this question, here's what I discovered. By the way, this is on a 31 Roadster. You can access the two rivets (one on each end of the front seat rear riser) either from underneath the car or by removing the seat riser/ angle floor panel as an assembly. If you plan on replacing the curtain pan, removing the rear riser will help access the rivets that fasten the curtain pan to the cross brace.

11-18-2018, 03:20 PM	#2
sjhark Member Join Date: Mar 2016 Location: Brandon, SD Posts: 74	Re: Angle floor panel replacement Since I seemed to have stumped everyone with this question, here's what I discovered. By the way, this is on a 31 Roadster. You can access the two rivets (one on each end of the front seat rear riser) either from underneath the car or by removing the seat riser/ angle floor panel as an assembly. If you plan on replacing the curtain pan, removing the rear riser will help access the rivets that fasten the curtain pan to the cross brace. __________________ If earthworms had machine guns, we'd all be in trouble!