The Ford Barn - View Single Post - Early Ford Torque Tube and Driveshaft Alignment How To. Flatty Valve Seats. 32 Pt 19

19Fordy · 11-13-2020, 11:30 AM

Mart, thanks for posting that very informative video. I really like that you show the entire process including how to correct the "over bend" mistake. Do the built up weld beads on the banjo end of the drive shaft present any problems? Do you grind them down smooth or leave them? Please refresh our memories as to what year make and model you are working on that required you to undertake this drive shaft modification. Thanks.

11-13-2020, 11:30 AM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: Early Ford Torque Tube and Driveshaft Alignment How To. Flatty Valve Seats. 32 P Mart, thanks for posting that very informative video. I really like that you show the entire process including how to correct the "over bend" mistake. Do the built up weld beads on the banjo end of the drive shaft present any problems? Do you grind them down smooth or leave them? Please refresh our memories as to what year make and model you are working on that required you to undertake this drive shaft modification. Thanks.