The Ford Barn - View Single Post - Early Ford Torque Tube and Driveshaft Alignment How To. Flatty Valve Seats. 32 Pt 19

Mart · 11-13-2020, 08:02 AM

Hello! Welcome to some Early Ford Tech from Mart's Garage. How can you tell if your driveshaft is running true? How about the torque tube?? Is it square to the axle? Well, I'll show you a method that has worked for me. Best of all, it doesn't require any fancy equipment. Mind reeling from all that tech? Lets bust out the vintage Buma valve seat tool and show the O'l 59 flatty what for.

Thanks for checking in, hopefully some of this tech stuff will help someone out there.

Catch you on the next one! Mart.

https://youtu.be/eTmxoFgBlUU

11-13-2020, 08:02 AM	#1
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,755	Early Ford Torque Tube and Driveshaft Alignment How To. Flatty Valve Seats. 32 Pt 19 Hello! Welcome to some Early Ford Tech from Mart's Garage. How can you tell if your driveshaft is running true? How about the torque tube?? Is it square to the axle? Well, I'll show you a method that has worked for me. Best of all, it doesn't require any fancy equipment. Mind reeling from all that tech? Lets bust out the vintage Buma valve seat tool and show the O'l 59 flatty what for. Thanks for checking in, hopefully some of this tech stuff will help someone out there. Catch you on the next one! Mart. https://youtu.be/eTmxoFgBlUU Last edited by Mart; 11-13-2020 at 09:35 AM.