The Ford Barn - View Single Post

Russell Reay · 07-31-2021, 07:46 AM

Bigger than 3/8", smaller than 1/2", probably 11 or 12 mm. The book says to use a 3/8 drive ratchet. It is pretty sloppy, but a 1/2" drive is too big.

07-31-2021, 07:46 AM	#2
Russell Reay Senior Member Join Date: May 2021 Location: NH/ VT Posts: 335	Re: Size square on banjo Bigger than 3/8", smaller than 1/2", probably 11 or 12 mm. The book says to use a 3/8 drive ratchet. It is pretty sloppy, but a 1/2" drive is too big.