View Single Post
Old 07-04-2021, 04:37 AM   #16
PeteVS
Senior Member
 
PeteVS's Avatar
 
Join Date: May 2010
Location: FP, NJ
Posts: 2,769
Default Re: Finally starting my ‘35’s juice brake conversion

I recommend copper-nickel tubing for ease of bending and flaring. You might want to make preliminary pieces with old copper or coat hanger wire to get things right before bending the lines. (And always slide the fitting nut on before flaring!)
__________________
Don't never get rid of nuthin!
PeteVS is offline   Reply With Quote