Quote:
Originally Posted by Brian
11 1/4" PCD for the 10" long style pressure plate, although a bit hard to measure as the holes are not diametrically opposite. Brian
|
Well thats a positive because thats what i have with this one I picked up yesterday, It is supposedly a 47 flywheel, so that rings true. I had a dig around the shed for some old clutches and found an 11 disc and cover, but then when I went through some of my old Y block stuff I found a 10" cover and disc from a NZ assembled 56 Customline. It has a 10 inch clutch disc and cover. The cover fits the bolt hole pattern and looks to be the same as a flathead??? The clutch plate has a fine spline but measures at 10" so I am hoping this will work with a Flathead 10" clutch plate, looks identical to the pics on the net. It does not cross reference in the Macs book but then our Customlines had many subtle differences than the US assembled versions too.