The Ford Barn - View Single Post - How to install running board stainless trim

42guy · 08-22-2012, 07:13 PM

If you are taking about 42-48's, you will have fun.
I slipped the bottom on and then using a 1" piece of wood and C clamps to force them on over the top. It took many trys, but finally got them on. They were orginal trim parts but the rubber might be thicker. I would like to hear other ideas.

08-22-2012, 07:13 PM	#3
42guy Senior Member Join Date: May 2010 Location: New York State Posts: 289	Re: How to install running board stainless trim If you are taking about 42-48's, you will have fun. I slipped the bottom on and then using a 1" piece of wood and C clamps to force them on over the top. It took many trys, but finally got them on. They were orginal trim parts but the rubber might be thicker. I would like to hear other ideas.