View Single Post
Old 10-20-2020, 12:11 AM   #9
bdtutton
Senior Member
 
Join Date: Sep 2016
Location: Southwest Michigan
Posts: 113
Default Re: Model A hot water heater installation

Quote:
Originally Posted by Jim/GA View Post
I see.

Is the thermostat in the upper hose up by the radiator neck? On the radiator side of where you are taking the hot water out for the heater?

My S/W Town Sedan was driven by the previous owner and his family in the Chicago area for many years. He installed a hot water heater inside the car on the passenger side. He had a thermostat in the upper hose. He also installed a small 12 volt electric pump to push the hot water through the heater core. I guess the car's water pump was not enough for him.

I took it out in Texas because we did not need the heat.

.
The thermostat is in the upper hose by the radiator neck. The water inlet has a special pick up to help direct water into the heater. There seems to be plenty of water circulating through the heater because it gets hot right away and seem to stay hot as I am driving. It was in the upper 30s this morning and heat started coming out after about a half mile and the car warmed up nicely, even with the fan running at the lowest speed on my way to work.
bdtutton is offline   Reply With Quote