The Ford Barn - View Single Post

Gary WA · 08-05-2020, 07:07 PM

First remove hood and rods,distributor, fan belt.Drain radiator, I place piece cardboard in front of radiator, to protect while removing head, remove nuts,, start trying to lift head up with water pump attached or removed. may need a little help with some putty knives. others will have their ideas they all work!

08-05-2020, 07:07 PM	#2
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,104	Re: Head Gasket First remove hood and rods,distributor, fan belt.Drain radiator, I place piece cardboard in front of radiator, to protect while removing head, remove nuts,, start trying to lift head up with water pump attached or removed. may need a little help with some putty knives. others will have their ideas they all work! __________________ www.whidbeymodelaclub.com Last edited by Gary WA; 08-05-2020 at 07:59 PM.