The Ford Barn - View Single Post

Bob C · 11-16-2021, 04:43 PM

If you have the ability to turn the hex to round (a lathe) then why not
take your 5/16" round and drill and tap it to 10-24.

11-16-2021, 04:43 PM	#32
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,755	Re: aircraft type steel tubing If you have the ability to turn the hex to round (a lathe) then why not take your 5/16" round and drill and tap it to 10-24.