Quote:
Originally Posted by Mulletwagon
Tom,
Let us know when you are back together and running.
|
So I got it running today (nice break in the weather). It runs great. No more knock and I was able to fix a lot of minor things while I had everything apart.
There is a bit more valve noise as I opened up the exhaust valve clearance from 15 to 18 thou' as this is a B engine.
Best part is no oil or water leaks! I use Yamabond (my favorite gasket sealer from my dirt bike workings) and paid special attention to the rear cam area and main bolts. I also went with a neoprene front seal.
Here's a couple of pic's:
engtrial1.jpg
engtrial2.jpg
Tom