[Joeyv]

Thank you all for you suggestions and feedback. I installed lap belts yesterday, in preparation for International Model A day tomorrow. I wanted to get something in before I take the car out for our first tour (ever). I may go back and upgrade the installation (e.g. 3 point belts), based on some of your suggestions. I currently have the outer belts anchored to the bolt that holding the body to the chassis. The inner belts are attached through the floor pan and they are backed by a 6” x 13” x 1/4” piece of steel. That should hold my body in the car for low speed mishaps, although I may still may collide with the steering column. Thanks again for sharing your wisdom!