View Single Post
Old 10-03-2020, 08:34 AM   #1
Senior Member
Join Date: May 2010
Posts: 2,484
Default Ford V belts - 39-38

What is the correct width V-belt that drives the pumps and generator off the crank for the '39-48 flathead ? The ones I see from NAPA are truck & bus application, and say they are 3/4" wide. You measure them and they range from .600 to .655 or a little less or more than .625 or 5/8". They seem to sit a little high on the sheaves. Thank you Fordbarners.
russcc is offline   Reply With Quote