View Single Post
Old 09-26-2020, 09:35 AM   #4
Neil Wilson
Senior Member
 
Neil Wilson's Avatar
 
Join Date: May 2010
Location: Boulder, CO
Posts: 506
Default Re: 28-29 radiator splash shield

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by jdpalmer View Post
Can anyone send pictures of correct screw holes for 29 radiator splash shield as mine was mounted with sheet metal screws and cooled up piece welded on shield for screws. need to know the holes in the horn spring and if there dimples in fender horn for the screws

There are some pictures of the front splash shield (same for A and AA chassis) at https://aafords.com/aa-chassis/aa-16000-fenders/#fss. The brackets John describes is shown.


There are no dimples in the 1929 fenders. I don't know the meaning of "horn spring" or "fender horn". The frame has punched hole where the hood-shelf-to-sheld-screws run.
__________________
neil@aafords.com - email contact

https://aafords.com Ford Model AA Truck Club @ aafords.com
Neil Wilson is offline   Reply With Quote