View Single Post
Old 08-01-2020, 09:42 PM   #4
Cpuckett
Member
 
Join Date: Mar 2020
Posts: 52
Default Re: 31 Model A e brake question

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Mike Peters View Post
Orient the e brake toggle levers so that they both angle towards the e brake control arm and the brake rods do not bind. Adjust the e brake rods so that the e brake is barely released. In other words, take the slack out of the linkage. They should pull the same on both sides. The e brake band will self center in the brake drum, and should turn freely when released and grab hold when applied.
Got it!!! Thanks Mike!!!!
Cpuckett is offline   Reply With Quote