View Single Post
Old 08-01-2020, 01:23 PM   #3
Cpuckett
Member
 
Join Date: Mar 2020
Posts: 52
Default Re: 31 Model A e brake question

Quote:
Originally Posted by Mike Peters View Post
Orient the e brake toggle levers so that they both angle towards the e brake control arm and the brake rods do not bind. Adjust the e brake rods so that the e brake is barely released. In other words, take the slack out of the linkage. They should pull the same on both sides. The e brake band will self center in the brake drum, and should turn freely when released and grab hold when applied.
Iíll try that, thanks Mike
Cpuckett is offline   Reply With Quote