The Ford Barn - View Single Post - Wheel stud replacement help: '42-'48 hubs & drums

Fordestes · 05-07-2020, 02:48 PM

Be careful removing the hub from the old drum, I drilled mine out and there was a left over bit of metal on the outer edge where the swedge rolled the shoulder against the drum , I cracked an old drum and warped a hub flange trying to hammer and press the old studs from a hub.

05-07-2020, 02:48 PM	#12
Fordestes Senior Member Join Date: May 2010 Posts: 886	Re: Wheel stud replacement help: '42-'48 hubs & drums Be careful removing the hub from the old drum, I drilled mine out and there was a left over bit of metal on the outer edge where the swedge rolled the shoulder against the drum , I cracked an old drum and warped a hub flange trying to hammer and press the old studs from a hub.