View Single Post
Old 03-30-2020, 03:18 PM   #10
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
Default Re: Been dabbling in Stainless trim repair

I have dabbled around with some SS trim repair, had very good luck with the finished product.
A friend of mine showed me a neat trick, using a drill press, chuck up whatever tool you are using to work the dent out, using the drill press to push the dent (s) in lieu of beating them out with a hammer/mallet.
__________________
Bill.... 36 5 win cpe
blucar is offline   Reply With Quote