Re: Pics for your review/ comment.
Opps. Not good. Can't be used as is. Re grind if it will clean up or new crank. Bearing is still OK. If fitting a new crank you can size bearings using Timesaver. Say the old crank is 0.010 under. Fit a standard crank and fit bearings with shims and timesaver. If you re grind the crank you will need to pour and bore new bearings. Too bad, it was a good crank before sitting with moisture in the bearing.
Did you say that this is the engine with the sludge? The oil could have been acidic.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|