Re: Bolt sizes for pressure plate and bell housing
Bell housing to engine bolts with cast housing are 7/16-14 x 1-1/4"
With pressed steel housing 7/16-14 x 1"
The pressure plate bolts are special 3/8-16 x 3/4" with appox. 5/16" that is not threaded.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 12-11-2020 at 06:39 AM.
|