Re: Original Intake Manifold
Freddie
There are basically 3 different manifolds, one with our a vacuum hole (BOP-6/29), one with a high vacuum hole (7/29-7/30) and the last with a lower vacuum hole (7/30-EOP).
Also, be careful that the thickness of the mounting flange is correct. When an intake manifold is bolted to a exhaust manifold, they should be machined so that the mounting surface is flat across them.
__________________
Bill Cilker, Jr
Unrestored 190A Victoria
45B, 160B & 189A
Victoria Association President
|