View Single Post
Old 05-24-2020, 01:34 AM   #66
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 8,081
Default Re: white steam from breather and water tailpipe

Sponsored Links (Register now to hide all advertisements)


Rick's 304 Flathead !

* 8BA block, tanked/fluxed/peened/line-honed, bored to 3-3/8”
* Block drilled for full flow oil, Relieved, Ported Out
* New Scat 4-1/4” Crankshaft
* All New Bearings (Mains, Rods, Cam)
* New Ross Forged Pistons, New Grant Rings
* New Scat H-Beam Rods, Rotating Assembly Balanced
* New Guides/Locks/Keepers
* Recut Valve Seats to 45 Degrees
* New Stainless 1.5 Valves
* New Hollow Adjustable Lifters
* New Isky Single Springs
* New Isky 400jr Camshaft
* New Aluminum Timing Gear
* Owner Supplied Offy 8BA Heads (Re-Polished)
* Owner Supplied Weiand 3-deuce Intake (Re-Polished)
* 3 Chrome Owner Supplied Stromberg 97's, New Linkage
* New 1-pc front seal
* All New “Best” brand Gaskets
* Blasted, Cleaned 8BA Truck Oil Pan
* New 8BA oil pump, tube, screen
* Owner Supplied Polished Water Pumps
* New Polished 12Volt PowerGen, Go Cat Bracket
* Distributor with Pertronix and Coil
*New Plugs, Looms and Wires cut to fit
* New Bolts throughout
* Fully Assembled, Engine run and tested
* $9,000 Total, Shipping by GCS (720) 284-1790 2019 Go Cat Speedshop LLC, Denver, Colorado.
__________________
The only thing nice about being imperfect is the joy it brings to others....

"Silver rings, your butt! Them's washers!"
"We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969

https://www.youtube.com/watch?v=7NReUd2_0u0

Last edited by petehoovie; 05-24-2020 at 01:40 AM.
petehoovie is offline   Reply With Quote