The Ford Barn - View Single Post

alchemy · 03-03-2016, 11:32 AM

Pull the body and cut the welds with a thin cut-off disc. Shouldn't make too much damage. Align the crossmember with the original rivet holes, then re-rivet and maybe add some hidden welds as well.

03-03-2016, 11:32 AM	#2
alchemy Senior Member Join Date: May 2010 Location: middle of Iowa Posts: 647	Re: advice/opinions '34 sedan Pull the body and cut the welds with a thin cut-off disc. Shouldn't make too much damage. Align the crossmember with the original rivet holes, then re-rivet and maybe add some hidden welds as well.