Quote:
Originally Posted by 1939 Tonner
A big thanks to all of you!!!
I'll get some NAPA SL-24238 140W GL-4.
Something I noticed when I drained the transmission, it seemed to be filled well past the fill hole, and it seemed to be mixed with the corn head grease that I put in the torque tube. Is it possible for the corn head grease to get into the transmission? if so does that mean I'm overfilling the torque tube?
|
Check the rear diff fluid level. Fluid can transfer back and forth depending on the rake and gasket/seal conditions. If the trans is overfilled and the rear is low, it's all migrating forward. There will be transfer between the u joint and and trans if you don't have a sealed rear bearing on the trans.