The Ford Barn - View Single Post

Fordfan29 · 09-20-2017, 10:27 AM

My new 6:1 Snyder head was not flat when received a couple f years ago. They offered to trade me for another head & it had taken three weeks to get the first one. I had a local shop mill the original head and Snyders reimbursed my costs. I also installed their recommended gasket with the silicone ridges & torqued & retorqued to their instructions. I had a gasket failure but a copper gasket & the flattened head have been doing their job ever since. The block was checked & found to be flat.

09-20-2017, 10:27 AM	#20
Fordfan29 Member Join Date: Mar 2017 Posts: 41	Re: New hi compression heads My new 6:1 Snyder head was not flat when received a couple f years ago. They offered to trade me for another head & it had taken three weeks to get the first one. I had a local shop mill the original head and Snyders reimbursed my costs. I also installed their recommended gasket with the silicone ridges & torqued & retorqued to their instructions. I had a gasket failure but a copper gasket & the flattened head have been doing their job ever since. The block was checked & found to be flat.