Re: Generator charging revisited
Another option is to add a capacitor across the DVM leads. A condensor normally used for the ignition can be used. If you use another capacitor make sure it is installed correctly. An electronic capacitor will have a negative and positive side. You can just leave it installed if you want because it will eliminate most electrical noise coming out of your generator. You may be able to hide it inside the cutout or you can just install it anywhere, like inside the instrument panel. Just connect the capacitor between the lead coming from the generator to ground.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|