The Ford Barn - View Single Post

Y-Blockhead · 01-21-2021, 03:38 PM

It appears the Murray has a different door sill than the Briggs. The Briggs definitely uses screws, the holes are countersunk.

JayJay, Thanks for the heads up on the finish washers at MAC's. The "flush type finish washer" that MAC's has must be what was used previously, except the nickel is worn off. I have some stainless ones ordered.

01-21-2021, 03:38 PM	#4
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Re: Briggs Town Sedan Door Sills It appears the Murray has a different door sill than the Briggs. The Briggs definitely uses screws, the holes are countersunk. JayJay, Thanks for the heads up on the finish washers at MAC's. The "flush type finish washer" that MAC's has must be what was used previously, except the nickel is worn off. I have some stainless ones ordered.