Quote:
Originally Posted by KULTULZ
This keeps bothering me.
|
That second photo is a roller bearing kit for '54/55 (and would fit the '56 idler arm), but I don't think the old style was available at the factory anymore.
The original print of the '56 Ford Car shop manual shows metal encased rubber bushings for the PS idler arm. (that could mean that the early '56 cars might have had some of the '55 idler arm kits, but that the rubber bushings shown in the shop manual were the factory authorized replacement).
What bothers me is that his '57 idler arm has large recessed washers on the shaft ends that have no value at all with the use of rubber bushings. I think that idler arm came off a different car. Mercury or Edsel maybe?