The Ford Barn - View Single Post

deuce lover · 03-07-2020, 11:52 AM

Then the bearing should be good.Is that little return spring connected? You can see that when you remove the insp cover.Metal grinding sound - not good.
When I first got my '33 together and running I had a similar sound ,I had no play in the pedal.It was to tight-in other words the bearing was constantly riding on the clutch fingers.I backed off on the adjustment and it cleared up.

03-07-2020, 11:52 AM	#10
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,308	Re: Throw out bearing Then the bearing should be good.Is that little return spring connected? You can see that when you remove the insp cover.Metal grinding sound - not good. When I first got my '33 together and running I had a similar sound ,I had no play in the pedal.It was to tight-in other words the bearing was constantly riding on the clutch fingers.I backed off on the adjustment and it cleared up. Last edited by deuce lover; 03-07-2020 at 11:58 AM.